What issues should be noted in the design of glass slides

Nowadays, we can see glass slides in many places, especially in some mountainous areas, where the construction of slides can facilitate people's travel. The slide must have high safety and stability, as it is necessary to ensure people's travel safety. Therefore, the slide construction team should strengthen the stability of its structure when designing the slide, so as to have greater security in terms of safety.

When building a slide in mountainous areas, the aspect ratio between the main cable and the main cable should be considered first. Generally, a scale between 1:10 and 1:14 is selected, and the specific aspect ratio should be finely determined based on the terrain characteristics of each mountainous area, but all should be kept within the standard value. When constructing the cable line spacing and glass slide horizontal surface, the width of the slide surface should be measured, and the ratio between the span size and the slide width should be at least 1:30. This ratio can improve the rigidity of the slide installation and also increase the lateral stability of the slide.

The larger the distance between the main cables, the greater the load-bearing capacity of the bridge tower. To maintain the stability and fixation of the entire glass slide, it is necessary to maintain the scale of the distance between the main cables and the load-bearing capacity of the bridge tower.

Based on the scale of the distance between the main cables, the width of the slide can be determined. In the installation design of glass slides in mountainous areas, construction should not be carried out according to the ordinary width of the slide. The lateral stability of the cable bridge should be reinforced on the basis of maintaining the standard width of the slide surface, and the bearing capacity of the bridge tower is also affected by the main cables.

If the bridge deck installed on glass drifting cannot achieve the standard width, the scale can be increased in the middle distance of the main cable and the scale of the bridge tower can be appropriately adjusted. This design can ensure the quality of the suspension bridge and ensure that the bridge is used safely after the project is completed.